Organization name

SINAPI Biomedical (Pty) Ltd

SRN

ZA-MF-000012126

Manufacturer status

Active

4 warnings recorded — scroll inside the panel to see all entries.

• Do not resterilize
• Do not re-use

  Single use only

• Do not use if package is damaged
• Caution

  1. This device is only intended for use by appropriately trained personnel 2.Do NOT remove the connector-it contains the high negativity vent. 3. The tube roller must ONLY be used in conjunction with a high negativity vent, fitted in the connector. 4. Compatibility of the Sinapi Chest Drain with thoracic catheters needs to be established by the user. 5. Assess the thoracic catheter connections for signs of an air leak. 6. Thoracic catheter dressings should be occlusive. 7. Ensure that there are no dependent loops or kinks in the patient drainage tube. 8. Little or no drainage may indicate a blockage in the drainage system. 9.Do not keep the tube clamped during chest drainage or patient transport, this will inhibit drain operation and may compromise respiratory function of the patient. 10. Samples of the drained fluid can be taken directly from the needle-free sampling port located on the front of the device. 11. When using suction control, keep device upright to prevent fluids entering suction regulator. 12. Discontinue use and replace with a new unit if body fluids entered the suction regulator. 13. Observing Universal Precautions, discard the SCD in a medical waste container, in accordance with the Waste Management policy of the health care facility. 14. NOTE: Any serious incident that occurs in relation to the device should be reported to the manufacturer and the competent authority of the Member State in which the user and/or patient is established.

Primary placement in Germany; available across 17 countries total.

Trade name

Sinapi Chest Drain

UDI-DI code

Primary DI

The Primary DI is the main UDI-DI a manufacturer designates as the principal identifier for a device in EUDAMED.

06009900386799

Basic UDI-DI

Basic UDI-DI

The Basic UDI-DI is the main identifier that groups together all device variants of the same model — the regulatory "family" key.

60099003867SCDW5

Reference / catalog number

XL1000SC

Issuing entity

UDI issuing entities

Issuing entities are the organisations the European Commission has designated to assign Unique Device Identifiers under the EU's UDI system.

GS1

Risk category

MDR risk classes

MDR risk classes rank medical devices from lowest risk (Class I) to highest (Class III), which determines how much regulatory scrutiny they face.

Class I

Applicable legislation

MDR [Regulation (EU) 2017/745 on medical devices]

Status

On the market

Quantity

1

Additional product description

The SINAPI Chest Drain (SCD) is a non-invasive medical device that is connected to any inserted chest catheter. It is a sterile, single use device, intended to drain fluid from the thoracic cavity.

Additional information URL

No additional information URL provided by the manufacturer.

Clinical sizes

No clinical sizes registered for this device.

1 packaging level registered — each level carries its own UDI-DI.

• 06009900386799× 1 unitBase unit
  • 16009900386796× 12 units

• Batch number
• Expiration date
• Manufacturing date
• Serial number
• Software identification

European Medical Device Nomenclature — the EU product classification assigned to this device.

• A060203PLEURAL DRAINAGES WITH VALVE AND KITS

• Class I medical devices in EUDAMED

No certificate specifically references this device's Basic UDI-DI.

Certificate health across this manufacturer's portfolio.